Stephens Home PageLearn more about Stephens ManufacturingProduct InformationFind a Representative in your areaParts & Service DepartmentSalesVideo Tours, Literature, Logos, Associations
Search Catalog
      GO   
 All Categories    Lights/Switches/Buttons
All Categories > Electrical Parts > Lights/Switches/Buttons  
 

Lights/Switches/Buttons


Click on a Product to view details.

Contact Block Only

Contact Block Only

(2)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Contact blocks for adding additional contacts to pushbuttons and selector switches. Electrical rating 6 amps at 120 VAC or 3 amps at 240 VAC. Available with normally open or normally closed contacts.

Many other type switches and pushbuttons available upon request.
Contact Block with Flange

Contact Block with Flange

(2)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Contact blocks with mounting flange. The flange is used to attach to the operator “pushbuttons and selector switches”, for use in non-illuminated applications. The electrical characteristics are the same as described in item B. above

Many other type switches and pushbuttons available upon request.
Electrical Parts

Float Switch


Float switch for use in clear water applications, may be used for tank full or tank empty installations. Has 1/2” N.P.T. male pipe thread. Electrical rating 30 VA.
Illuminated 2 Pos. Selector Switch

Illuminated 2 Pos. Selector Switch

(4)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Illuminated 22 mm maintained two position selector switch operators require 7/8” no-notch mounting hole used in conjunction item D. above. Available colors include: green, red, yellow and blue.

Many other type switches and pushbuttons available upon request.
Illuminated 3 Pos. Selector Switch

Illuminated 3 Pos. Selector Switch

(3)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Illuminated 22 mm maintained three position selector switch operators require 7/8” no-notch mounting hole used in conjunction item D. and B. above. Available colors include: green, red, yellow and blue.

Many other type switches and pushbuttons available upon request.
Illuminated Push Button

Illuminated Push Button

(2)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Illuminated 22 mm momentary pushbuttons require 7/8” no-notch mounting hole used in conjunction item D. Normal stock red and green with other colors available upon request.

Many other type switches and pushbuttons available upon request.
Light Module

Light Module

(9)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Zero maintenance LED light modules for use in conjunction with A. above less contact block or with item F. G. or H. with contact block when a pushbutton or selector needs to produce an illuminated signal operating voltage 48 VAC thru 120 VAC with other voltages available.

Many other type switches and pushbuttons available upon request.
Material Direct Flow Switch

Material Direct Flow Switch


Material flow detect switches, used to produce a signal in flow or no flow situations at a critical point, the signal is then used to correct the error or warn the operator. The switch uses a paddle and counter weight. Typically used on conveyors, feeders, in discharge openings of bins, bunkers or hoppers. Electrical rating 20 amp at 125 VAC, nema 3 and 4 enclosure rating, dust and weather tight.
Non Illuminated Selector Switch

Non Illuminated Selector Switch

(2)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

Non-Illuminated 22 mm 2 and 3 position maintained selector switch operators require 7/8” no-notch mounting hole used in conjunction item C. for two position selectors, and used with item C. and B. for three position configuration. Black in color.

Many other type switches and pushbuttons available upon request.
Pilot Light

Pilot Light

(6)
Replacement Pushbuttons, Pilot lights, Selector switches and accessories. UL listed, CSA certified, and CE marked. Nema ratings 1,2,3,4,12 and 13.

22 mm pilot lights require a (7/8”) mounting hole, the pilot lights feature no-notch mounting available colors include: white, green, red, yellow and blue.

Many other type switches and pushbuttons available upon request.
Prox. Type Limit Switch

Prox. Type Limit Switch


Proximity sensor, “Inductive type” senses metallic objects. Sensor range 20 mm .787”. Has on board load on indicating light for trouble shooting purposes.
Electrical rating: programmable normally open or normally closed output signals. Power supply 24-240 VAC.
Note: Capacitance type sensors “which provides non-metallic sensing” available upon request.
Replacement Board for Zero Speed Switch

Replacement Board for Zero Speed Switch


Replacement board for zero speed switch. This item allows user to replace the board without replacing the entire switch making repairs more cost effective.
Square D Limit Switches

Square D Limit Switches

(4)
Electro-Mechanical limit switches and operating arms. Rugged heavy-duty switches will with stand the harshest environments has a 360 degree pivoting head which allows use in a variety of applications. Electrical ratings double pole double throw contacts with an 10 amp load rating at 600 VAC. Enclosure rating Nema type 1,2,3,4,6,6P,12 and 13.
Standard operators listed with others available.
Note: Other operator levers available
Zero Speed Switch

Zero Speed Switch


Zero speed switch, normally used as zero speed sensor on conveyor belt applications, but may also be used as an under or over speed sensor. When installing on new applications the conveyor tail shaft must be center drilled 5/8” and tapped, must also use flexible coupling, coupling guard, stub shaft and mounting bracket. The unit has an adjustable start up delay.
Electrical ratings: supply voltage 105-135 VAC 50/60 hz. Double pole double throw contacts rated 5 amps at 120 VAC.

COPYRIGHT (C) 2005 - STEPHENS MFG. COMPANY. ALL RIGHT RESERVED.